11,78 €11,78 € + VAT
In stock
In stock
Suitable for all engines
Removes corrosion and sludge formation in the cooling circuit
Increased operational reliability thanks to the clean cooling system.
Neutralizes salt residues
The new coolant is protected from contamination by old dirt residues.
Compatible with anticoagulant
Alkaline, with a pH of 9–11
Compatible with all materials used to manufacture refrigerators.
It removes sediment from the cooling circuit and cleans the cooling system of contaminants. For example, it removes oil residues resulting from damage to the cylinder heads. The radiator cleaner can also be used as a preventive measure each time the coolant is changed.
250 ml is sufficient for 10 liters of cooling water. 1000 ml is sufficient for 40 liters of cooling water.
Notice
The cleaner is not suitable for use during vehicle operation.
Application area
For restoring cooling performance during refrigerator repairs and maintenance work on the cooling system.
Instructions
Add the contents of the container to the cooling water. Open the heater valves. Let the engine run and reach operating temperature for approximately 30 minutes. The deposits loosened by the radiator cleaner must be rinsed with water. The flushing process must be carried out without removing the thermostat. It is recommended to replace components that have been contaminated with oil, such as the expansion tank and hoses. Refill the cooling system after cleaning, bleed and check for leaks.
