27,05 €27,05 € + VAT
Sold out
Sold out
Sprayable sealant based on MS polymers for restoring the original texture after accident repair work.
Very wide range of adhesion possibilities
Adheres to a wide variety of surfaces, even without priming.
High Shore A hardness
The material is resistant to mechanical loads.
High tensile strength and elongation at break
The seam also withstands stronger movements/elongations.
Stable to UV radiation
Excellent aging behavior, even when the seams are not painted.
Possibility of painting after “liquid on liquid” application
Free of isocyanates and silicone
Notice
Do not allow Dichtfix to come into contact with fresh PU materials (i.e. materials that have not yet hardened). In case of painting with metallic paints, a passivating primer must be applied. The best adhesion between the paint and Dichtfix is achieved when the material is painted immediately after application.
The instructions for use are recommendations based on our tests and experience. Run your own tests before each application. Due to the large number of applications and storage and processing conditions, we are not responsible for the result of any particular application. To the extent that free customer service provides technical information or acts as an advisory service, such service assumes no liability unless the advice or service provided falls within the scope of the specified, contractually agreed upon service or if the advisor acted intentionally. We guarantee the consistent quality of our products. We reserve the right to make technical changes and actions for further development of our products.
