8,98 €8,98 € + VAT
In stock
In stock
installation and filling foam for gun application
Excellent adhesion to almost all construction substrates (except PE, PP, PTFE and silicone)
Better sound and thermal insulation properties compared to rock wool, cork and fiberglass
Fixed dimensions
No volume shrinkage and only minimal expansion upon complete curing of the product.
Fast full cure
With fine cells and uniform foam structure
Resistance to aging
Resistant to many solvents, dyes and chemicals
Area of application
Safely insulates and fills window joints, pipe openings, joints, wall joints, wall openings and cavities, as well as wall openings, ceiling edges, roller shutter boxes, etc. Adheres to concrete, stone, hard PVC, metal and wood. Does not adhere to polyurethane, silicone, PTFE and grease.
Οδηγίες
Shake the can vigorously 20 times before use. The substrates must be clean, solid and free from dust and grease. Highly absorbent substrates require pre-treatment. The bonding surfaces must be moistened with water before applying the foam. Moisten again if applying multiple layers of foam. Screw the can completely into the gun can holder – do not over-tighten or tilt it. The foam continues to expand after application. Make sure to remove any foam splashes immediately with PURlogic Clean, item no. 0892160. Clean the gun and valve thoroughly after use. The open can must always be left screwed onto the gun.
Chemical base
Polyurethane
Color
Ivory
With the possibility of cutting afterwards
60 min
Complete flexibility
24 h
Min. processing temperature
5 °C
Max. processing temperature
30 °C
Contents
750 ml
Content weight
750 g
